Cam lobe
Watched real close to see when plunger just cam off clip and then 1/2 turn.
This is with 7/16 studs with crimps nuts, fine thread.
The original lifters had a few that ticked a hair to much and one was spongy.
The new lifters have been very quiet after a few seconds once started.
just was looking to see if wear was normal, considering I swapped lifters
Last year.
I thought if wear mark went clear across nose of cam, lobe was considered
worn.
Gerry
__________________
1968 Firebird 400, 068 cam, TH400 & 13" Continental Converter, Auburn posi with 3:08 factory gears, Cliff's Q-jet resting on a 68 factory iron intake, GM HEI and Ram Air pans and RARE Long Branch Manifolds
|