Quote:
Originally Posted by LMSRACER
Personally, I prefer the 7/16" Fasteners. It removes less Material from the Main Webbing to Drill and Tap for the 7/16" Fasteners. I believe that the 7/16" Fasteners also provide sufficient "Clamping Load" to the Main Cap. Especially if you use the ARP Studs.
My 
Larry S. |
I talked to my machinist today and he said same thing, He wants the most straight down clamping force possible, and will sometimes ream out caps .030-.060 so there is absolutely no side pressure on the shoulder of the bolt and its all on the washer!...
__________________
Darby
74 Grandville 2Dr 455 c.i 4550#
2011 1.60 60 ft,
[email protected]@117.74
2017, 74 firebird -3600 lbs (all bests) 1.33 60 ft,
[email protected] [email protected]
M/T 275/60 ET SS Drag Radial
2024(Pontiac 505) 1.25 60 ft,
[email protected],
[email protected].... 275/60 Radial Pro's