I should be able to get 9:1 Is this enough compression for an 068?
Is there a good 068 sized roller on 112 LSA? Or is a roller just not needed for what I'm building. I don't want to have to worry about cams going flat.
I've been playing with CAMQUEST and the torque/hp curves I'm seeing with CAMQUEST and comps XR264hr and XR276hr are adding about 30-40 hp and 2-26 ft-lb over the XE262. I'd like to have that extra power if it doesn't negatively affect driveability, or will the roller give a better idle and driveability?
XE262 366hp 441 tq 218 224 @.050 on 110 lift .462/.469
XR264 400hp 443 tq 212 218 @.050 on 110 lift .487/.485
XR276 410hp 467 tq 224 230 @.050 on 110 lift .502/.510
Anybody running a similar combo? It looks like geeteeohgy is similar but with 9:3 and a 068.
|