roller or not?
Thanks Dick, I think the roller cam you chose may be a little big for my 400 with stock rods, rpm range 1800-5800. I like the next smaller grind Part Number: 20510710 rpm range 1400-5400.
I'm just wondering if the cost of the roller is worth it on my mild build. It looks like the roller really kicks up the torque numbers over a similar sized flat tappet. How much torque would I be giving up by running the crower 60240 HFT 210/221 .422/.446 on 112LSA?
Part Number: 20510711
•Advertised Duration (Int/Exh): 270/278
•Duration @ .050 (Int/Exh): 219/227
•Gross Valve Lift (Int/Exh): .515/.530
•LSA/ICL: 112/106
•Valve Lash (Int/Exh): Hyd/Hyd
•RPM Range: 1800-5800
•Includes: Cams Only
Previous Part Number: 60911
Part Number: 20510710
•Advertised Duration (Int/Exh): 262/270
•Duration @ .050 (Int/Exh): 211/219
•Gross Valve Lift (Int/Exh): .507/.515
•LSA/ICL: 112/106
•Valve Lash (Int/Exh): Hyd/Hyd
•RPM Range: 1400-5400
•Includes: Cam Only
Previous Part Number: 60910
Anybody have experience with the two voodoo rollers in a 9:1 400?
|