Quote:
|
How is the rear seat coming along? Any more photos. Very nice.
|
Sorry to say I have not moved to far on the rear seat .
While the interior is out I have started fixing my wiring both wires that run on the floor pan . They now run under the centre console with two new brackets to hold they neatly in place. Under the dash what a nightmare so its a case of going slowly and trying to fix the wires as I go . So far 4 live wires just waiting to short out bloody hell and I paid for this to be done correctly But good news I found power for my seats
Rear Seat
Top section
The original back seat hooks don't have to be cut off they will hook up the 2006 rear but I did trim the foam so the seat sits flush . The lower hooks ( 2006 seat ) needs to bend out so it will sit flush against the meal work . Holding bolts will be nut-certs (no welding) .
My seat height is the headrest hole the lower surface lines up with the top of original metal seat back . Hopefully I will not need to make a custom cord slide for the convertible top boot
Bottom section
The lower section you need to cut the original front hooks off so the seat sits lower and flush to the floor . I have cut out of the 2006 car the lower front hook up points but I think they will sit too high so I need to work that one out more since my seat needs to sit lower in a convertible . I might be going old school with a front bolt on the lip of the floor pan.