[Stan Weiss]

Originally Posted by ponchjoe

Is there a norm or average when zero decking? I bought a machined block and the seller couldn't find the receipt but thought .017 was removed (sounds like a lot to me) So what's average and what's too far?
Here's the spec on my Pistons..

Thanks
Joe

Joe,
Based on the picture you posted it should take 0.025" to zero deck. 4.21" stroke, 6.63" rod, 1.490" CH = 10.225". It says OEM Height 10.250"

10.250" - 10.225" = 0.025"

Stan