I am currently doing the body work and paint on the '62 Catalina featured in the movie "Selma". After skinning it down to bare metal and completing the body work, I applied PPG DPLF90, followed by two coats of K38 to get everything leveled out. The color coat is the Aquamarine in PPG Concept DCC Single Stage.
I hope I have finally figured out the optimal settings to avoid the mottling and cloudiness that has plagued me up until now. The P-sheet recommends 2 wet coats, but that resulted in absolutely awful mottling even after setting the gun to get a good spray-out.
Am I alone in having this issue with PPG Concept? I welcome any advice and suggestions.
|