x2 with Paul!
I have worked on a number of these and if the motor you will run this on is of 440 cid or larger and the heads have had the intake runner at the flange sized up to the RAiV gasket size and or the heads flow more than 260 cfm you will need to increase the runner expansion rate from what it is stock at the manifold flange all the way into the Plenum!
This is a ton of work if you want the most from this manifold and if you have the hood clearance and you are not heart set on this manifold a Victor would be far and away the thing to run!
__________________
Wernher Von Braun warned before his retirement from NASA back in 1972, that the next world war would be against the ETs!
And he was not talking about 1/8 or 1/4 mile ETs!
1) 1940s 100% silver 4 cup tea server set.
Two dry rotted 14 x 10 Micky Thompson slicks.
1) un-mailed in gift coupon from a 1972 box of corn flakes.
Two pairs of brown leather flip flops, never seen more then 2 mph.
Education is what your left with once you forget things!
|