[Nicks67GTO]

Im going to do you a favor here. Its going to sound harsh but im just going to say it......You need to send a lot of this stuff back. Eat the freight and send stuff back.

Ebay tubular upper/lower control arms w. urethane bushings and ball joints chinese junk that I wouldnt put on a go cart. Go over to pro touring.com and read about these. Buy from UMI, Ridetech, SC&C, BMR, Speedtech anyone but these ebay POS arms.
UMI tubular rear control and trailing arm kit. Great company and American made. Are they adjustable? If not send them back and get adjustable arms
Moog 5400 Front and CC5501 Rear springs Buy a good aftermarket spring from SPC, Hotchkis or someone else the generic repop springs are junk
Hellwig rear sway bar Hellwig makes good parts
KYB Gas shocks for all 4 corners Send these shocks back and at least get Bilstiens. If you want a fixed valve upgrade look at Ridetech or Chassisworks
Energy Suspension end links with urethane bushings
Energy Suspensions urethane sway bar bushings
Rear disc brake conversion kit with Caddy Eldorado calipers/ebrake I used these for 3 years without issue. You will have to shorten your ebrake cable though
Moog rear spring isolators
GM proportioning valve kit w. lines
New brake hose lines
New rear brake hardlines
Carter M6907 mechanical fuel pump (taking out the whiney Holley red pump)
Cardone 1997 Jeep steering box excellent upgrade for thee money
Lares 200 rag joint
Repro RAV Holley dual feed fuel hardline