Good luck with your testing it will be interesting to see your results. About 10 years ago I tested the Torker II against the RPM in my 80 Trans Am with a pump gas 462, ported iron heads, 2800 stall and 3.42 gears. My results were;
Performer RPM 11.42 @ 118.65 with 1.673
Torker II. 11.51 @ 118.31 with 1.685
I remember analyzing the time slips and thinking the T2 was a bit slower between the 60 ft and the 330 ft mark.
I had to go up two jet size when I installed the T2 and use slightly larger pump nozzles.
Keep up the good work!
