Quote:
Originally Posted by 72LuxuryLeMansLa.
You want to define "big turd" for us? According to SD Performance "In a recent dyno test this cam installed in a 464ci engine with 9.5 to 1 compression, a set of our 250-260cfm CNC ported #11 cast iron heads, CNC ported cast iron Q-jet intake and a prepped Q-jet carb made 503hp and 575+ lb/ft of torque on 91 octane."
In my world 575lb/ft and 503HP does not equate to a "big turd" but is a respectable car. WE ARE in the street section after all.
|
Lol
Engine had 4x cnc SD heads and same compression and was done by 4500 rpm
3900lb car ran 13.25 - 13.40's
Didn't run much faster when he changed to edelbrocks and 2 camshafts later.
