[screamingchief]

Originally Posted by ponyakr

What about the 744 RA3 stick cam. I've heard at least one guy really badmouth this cam.

Sigh...

I know I'm that "one guy",I even remember when & where that happened,but FYI Don I did'nt badmouth that 744 cam @ all,That's just how you reacted to being told something you did'nt already know.

See,the problem lies with the fact that you were recommending using that 744 cam to guys and telling them they could use "stock" valvesprings and pressed in studs and such,and all I did is inform you and anyone reading that thread @ PSP that was a bad idea,as even the factory used stiffer springs and screw in studs as SOP due to that specific cams lobe design and it's known tendency of being hard on valvetrain pieces.

That 744 cam has a lengthly background story that apparently you have no idea about.

You gotta stop being so hyper-sensitive to things like this Don.

I'm sure you're gonna wanna climb up on the cross after this post too...

But there's no valid reason for you react like that,as I harbor absolutely zero animosity towards you Don,I just like to see good info being passed along on these forums,and as such I will readily correct any subpar info being passed along as gospel,I do such just to help those other folks that dont know any better than to trust said subpar info/advice.

Have a nice day.

Bret P.