Quote:
Originally Posted by Tom Vaught
Really. A SB Ford with 2 stages was running those numbers ay the same weight years ago.
I would hope they could do better than a 412 cid Ford Small Block engine (with a much bigger engine and 3 stages). Lets see some 7.40s.
Tom V.
|
Quote:
Originally Posted by KO
John Force went 3s with a Ford plastic body with a Mopar engine which is just as relevant on this site
|
1) The Ford has Nitrous (2 stages)
Fulton has Nitrous 3 stages
2) The Ford had a Dry Sump System
Fulton has a Dry Sump System
3) The Ford was running a Canted Valve "Old School" Yates head
Fulton is running a canted valve head.
4) The Ford was running a 10.5 W tire
Fulton probably has something better years later.
5) The Ford as was said was running basically a small engine (with rpm)
Fulton is running a much larger engine within 500 rpm of the Ford engine's rpm
6) Compression ratio is similar if you believe the posts on the board.
So how do these specs resemble a John Force plastic bodied vehicle with a Mopar engine?
Tom V.