Quote:
Originally Posted by Tom Vaught
1) The Ford has Nitrous (2 stages)
Fulton has Nitrous 3 stages
2) The Ford had a Dry Sump System
Fulton has a Dry Sump System
3) The Ford was running a Canted Valve "Old School" Yates head
Fulton is running a canted valve head.
4) The Ford was running a 10.5 W tire
Fulton probably has something better years later.
5) The Ford as was said was running basically a small engine (with rpm)
Fulton is running a much larger engine within 500 rpm of the Ford engine's rpm
6) Compression ratio is similar if you believe the posts on the board.
So how do these specs resemble a John Force plastic bodied vehicle with a Mopar engine?
Tom V.
|
no real Pontiac enthusiast gives a damn about what some Ford runs
1000s of max effort Fords out there, only a dozen or so all out Pontiacs
"old school" heads with 50 years of development compared to street heads worked over
a real comparison would be an FE Ford vs. Pontiac...not even close