x2 with Suntune !
Unfortunately many guys get around to drilling this hole thing on a Saturday, or Sunday nite and then they are stuck trying to drill the stock plug, or even a harder metal plug like a steel Allen set type!
If you take either type plug and heat it up until it glows orange in a dark room and then keep heat on it and cool it down slow you will then be able to drill it with non high speed bits.
Drill most of the way thru it but for .020" and then use the bit of .030" or so, job done in 15 minutes!
Also a roller timing chain does not even need the amount of oil that comes out if that stock size front lube hole unless the motor never see's over 2500 rpm!
__________________
Wernher Von Braun warned before his retirement from NASA back in 1972, that the next world war would be against the ETs!
And he was not talking about 1/8 or 1/4 mile ETs!
1) 1940s 100% silver 4 cup tea server set.
Two dry rotted 14 x 10 Micky Thompson slicks.
1) un-mailed in gift coupon from a 1972 box of corn flakes.
Two pairs of brown leather flip flops, never seen more then 2 mph.
Education is what your left with once you forget things!
|