[72projectbird]

If the 73 nose still has its steel bracing then the 71 hood release wont work without some modifications. In fact the 73 grills don't have a spot cut out for the 70-72 hood release, so you'll have to modify some things to get it to work.

I had a 73 nose with all its steel on my 71. It bolts up fine. I ended up making a hood release from an old hood pin lanyard I had. You could cut the top out of the driver side 73 grill and run the 71 hood release if you either remove the big steel brace, or bend the 71 release to fit under the brace. You can also put 70-72 grills in the nose, which would let you use the original release. I put 72 grills in mine at one point.

73 used a one year only hood release. The release came out of the lower valance and used a cable to operate the latch. If you plan on keeping the 73 nose on the car permanently I would track down the 73 release.