Couldn't get and answer from Right Stuff other than "follow the fuel line routing on the car and it will be easier to install with the body off the frame" (a real revelation there). It sort of fit. Offsets around frame reinforcements were in the right place but I had to massage every bend to get it to tuck back tight into the frame.
It was impossible to install over the rear frame rails where they kick up over the diff. I had to bend to re-route up the back seat/trunk divider and fish it out over the rear cross-member after cutting about 18" off the end. I double flared the end and ran a 1/4" flexible fuel line whip from there to the return fitting at the tank.
It was a bitch.
Last edited by NeighborsComplaint; 09-20-2015 at 08:22 PM.
|