Quote:
Originally Posted by GRX
Easy enough to make your own bench bleed kit from a few parts. Glass jar makes bubble observation simple and eliminates them getting sucked back into the cylinder. Far as bleeding the entire system goes, I am a fan of the Russell speed bleeders. Makes the operation a simple one man job.
 |
nothing wrong with home ingenuity. However your lines are so long I would guess your bubbles can't make it all the way out. The cheap little plastic fitting bleeder kit I have with the clear plastic lines I can see that bubbles just barely make it out. Reading the instructions for bleeding a master says to only push the plunger in 3/4 to 1" at most. If my lines were any longer I would just be sucking the bubbles back in.