Quote:
Originally Posted by 68WarDog
With 98cc heads with a "stroke" 400 and 9:1 c/R , I'm guessing about 455 ci. The 744 IMO is too small, I would try something like a 041 and a little more if you spend for porting. Good luck
|
Strokes kit is by eagle. 4.25 stroke. Again going off my engine guy he says it should be 461 ci. (Don't know if that will make a diff in your choice) You guys are recommend factory grind cams, is there a place I can look up the pics for these cams to get in idea as to what they are? And why factory grinds? Do aftermarket ones not work as well or would they just be better with my setup?