[Pepi]

Originally Posted by njsteve

I took all the original springs and soaked them in some detergent to get the adbestos dust off them and also scrubbed the original brake shoes as well. I then reinstalled everything today and bled the brakes.

One interesting thing to note about the assembly line installed shoes is how the bonded front shoe is grooved with a 1/2" slot down the center of the lining. The steel portion of the shoe appears to have a green zinc chromate finish on it. (it is kind of hard to tell from the photo since I used a flash when taking the photos).










And with the drums back on. Each drum had two copper Tinnerman clips holding the drum onto the studs. The passenger side drum also had a "GY" sticker on it.





It also looks like the brake drums are date coded "6 2 73" and "5 30 73".

Steve, definitely cool to see such an original car. It has been a while since I've looked at any of my brake pads, but do remember seeing a groove like that on the pads and on the front rotors.