[Nicks67GTO]

Well ok then, ill keep on rolling!

Here is my windshield list. Ill be lucky to get this all done by the end of April. Im doing Midwest Musclecar Challenge in May so Iv'e got to get it all done and tested by then...



First order of business was mocking everything up, making some changes on the rear axle housing to accommodate the watts link, test fitting the new Tanks inc gas tank and getting the watts frame and rear axle to powdercoat.



Then we moved onto the UMI rear shock tower brace. This is a great idea and I can see where it would add strength. The problem is I couldn't get my hands up underneath in between the frame and the trunk floor to get these in place. I fought like hell and made it happen just to get witness marks, removed everything and welded nuts on the back side of the brace. The holes are slotted on one side to allow for frame differences. I think UMI could improve this product with a cage type of nut on the backs of the part allowing for movement and frame differences. This would be a major improvement and well worth the cost instead of fighting it.

Once stuff gets back from powdercoat things will move along quicker...