Quote:
Originally Posted by slowbird
Nothing an iron head and flat tappet cam can't do. We should raise the bar some.
|
Try 87 octane,850 rpm idle,13.5 inches of vacuum,11.40's/119/120mph with a mild 3.08 gear,mild convertor,3900 lbs..driven 200 miles to the track roundtrip.Running the same valve springs and lifters since SD assembled the heads in Dec. 2008!Pretty easy to achieve.....
Plus my wife ordered these heads to surprise me with no clue what she was doing other than Dave and Marcel asking her questions to ask me!Homerun in my books!
__________________
466 Mike Voycey shortblock, 310cfm SD KRE heads, SD "OF 2.0 cam", torker 2,generic one inch open spacer
373 gears 3200 Continental Convertor
best et 10.679/127.5/1.533 60ft
308 gears best et 10.76/125.64/1.5471