[grandville455]

Originally Posted by Will

I'm not understanding this math. If hot lash is .006 x rocker ratio how could the required lash ever be .003"? .006 x 1.5 = .009.

What am I not understanding?

What Mike was saying is if your hot lash is more then .006x rocker ratio, in this case 1.5 ...which is 009, you don't want to be higher then that total hot
, so if u have to set them at .003 or whatever x ratio to stay under that .009 , then that's what u do. In my case I was using 1.65's ...the .003 is just a example...but I ran mine at .003 cold, n we all know how my 4550 lb car ran!