Quote:
Originally Posted by Bentwheelbob
Pat - thanks for responding. For now, if you could just post a good picture of the 1/4 EVAP hose and stampings I would be appreciative. Also a dimension on how far apart the stampings are on the hose. I am planning to make a jig this weekend to hold the hose and keep the rubber stamp properly located, but would like to see a good original first.
|
Here's the one in my car now. I'll take some pics of the other hoses and post them tomorrow. So you telling me that inline tube sells the evap stamp?
Cool....just looked it up. I'd just use that spray engine paint for the blue color. Spray some out and dip away. Gotta be close to the same color blue stamping.
