Quote:
Originally Posted by dataway
Sweet! I'm up in the air about my floor ... it's just got a couple of small holes in it .. no more than a dollar bill total .... but ... do I replace it in small pieces ... or just make it happen with the whole thing. When I consider how much work it will be stripping all the crap off the underside of the old floor ... makes it attractive just to replace the whole thing.
|
Quote:
Originally Posted by Greg Reid
I wouldn't replace a floor for that small of a rusted out area....but I'm a big believer in keeping as much original metal as possible. Actually, my '68's floors had just a little 'lace' showing where the front passenger side floor meets the toe-board. I cut it out and replaced just that area with some sheetmetal.
If I had it to do again, I would have just used the POR-15 floor kit to fill those tiny pinholes. http://www.por15.com/FLOOR-PAN-TRUNK-KIT_p_61.html |
I agree with Greg, keep as much of original floor as possible. Let me know if you need a piece that has a particular shape, I might have a solid section on one of my cut pieces.
Bryan