Thread: Harmonic Balancer Removal
View Single Post
  #4  
Old 03-14-2016, 09:23 AM
Half-Inch Stud's Avatar
Half-Inch Stud Half-Inch Stud is offline
Ultimate Warrior
  
Join Date: Jul 2000
Location: BlueBell, PA or AL U.S.A.
Posts: 18,890
Default
Quote:
Originally Posted by Joe37 View Post
We use a 3/8" thick steel ring bolted to the balancer ( pulley bolts ) with a handle welded to it long enough to reach the frame rail. With four grade 8 bolts, you can torque the balancer to spec's or undo it...
Joe
Can you make & sell a bunch? I'll take a square-tubed handle.

Reply With QuoteReply With Quote