Quote:
Originally Posted by Stan Weiss
When a cam is designed normally the lobe / valve lift is done and than a lash ramp is added. Depending on what the designed wanted for his lash ramp and your rocker arm ratio that tells you what the standard lash should be. Now unless you got the perfect cam, running lash loops on the dyno can show some improvement. But one setting does not fit all.
Stan
|
Like I said whatever it wants.
__________________
EHTTFMF!
Being dead, it is not hard on you. You don't even know you're dead. It is hard on everyone else that is not dead.
BEING STUPID WORKS THE SAME WAY! The rest of us suffer.