When making dyno pulls, it's hard to control the engine when going to full throttle, and start pulling way down low. A trick that can be done to get dyno numbers down low is to make your normal pull up to where you want to pull it, then start increasing the water to load the engine down to whatever RPM you want to go down to. Then it is much easier to control, and you can get numbers down to 2000 or so if you want.
__________________
Paul Carter
Carter Cryogenics
www.cartercryo.com
520-409-7236
Koerner Racing Engines
You killed it, We build it!
520-294-5758
64 GTO, under re-construction, 412 CID, also under construction.
87 S-10 Pickup, 321,000 miles
99Monte Carlo, 293,000 miles
86 Bronco, 218,000 miles
|