Great guys looks like 1 inch is the hole size and it's the same size the sleeve on bushing that Ames sells (one of the early pics on this thread) I found a nice heavy steel washer 2 1/2 outside dia. with a 1 inch inside dia. hole.(at the local ace hardware). My thinking is just grind the core to bare metal and center that washer and tack it with the mig.? Any thoughts? The washer will cover the rusted hole by enough to give me some good metal to weld to. Saves me time in cutting a flat pcs and cutting hole. Doug
__________________
1979 Trans Am
307 RWHP 380RWTQ
13.8@103
1979 400 Block, 1970 Heads, Unknown Cam, Comp Cam Lifters, Edelbrock RPM Intake, Hedman Headers, Holley 750 Carb, WFO Drop Base SOLD
1968 GTO convertable project. 400 auto with air. west coast car . Not started in 15 ..update now running (around block spinning tires all the way. Have a lot of cosmetic work to do winter of 17/18
1969 GTO 400 4 Speed this a complete project. Rebuild will start in spring of 2017. SOLD
|