Yep We were there ....
First time for me running with any type of drag radial ever...
Best time 13.07, 60 ft 2.01, all @107.79..and I was spinning .....
I need to work on my burn out technique 
I also need to get rid of the air shocks in the azz end as there is no give in the rear so not sure if that would help.....they will be off in a few weeks and hopefully we will be back in Aug.....hopefully I can borrow Andy tires again.....
I actually ran a 13.06 @108 on street tires peddling the car.........figure that one out.....
Ernie and Andys cars are ridiculous.....in a good way 
__________________
 1973 Firebird Navajo Orange w/shaker,1973 400/461,1972 Intake SD CNC'd,1977 Q-Jet 800 CFM w/ Cliffs Kit,Tanks Inc PA4 255 Walbro intank pump ,-8an feed/return,RobbMc Regulator,RobbMc 40 micron filter,253 CFM 6x-8's w/H.S 1:5 Roller Rockers,SD Stump Puller H/R Cam 230/236 @.050 112 lobe separation 565/.570 lift,Crower Solid Rollers,28150 Hedman Headers,3" exhaust,full tailpipes,350 Turbo,9.5" 3200 Converter,3:42 gear,8.5 posi,C/E slide-alinks,Koni adj frt shocks,Best [email protected] Lookin for 11's
Last edited by cnc; 07-18-2016 at 10:05 PM.
|