Quote:
|
intake was suppose to have been port matched to my heads but looks off
|
With D-port heads, I would think the head ports need work to match the intake port?
(the Victor has big port openings?)
With the intake gasket (does it match head ports?) on and the intake bolted down, take intake off and see what the impressions look like on the gasket?
If the bottom of intake port also needs to go lower, you can mill the intake, but it would basically just fit your heads then?
Have the heads been milled previously?
Possibly the intake side of head wasn't also milled if so?
__________________
John Wallace - johnta1
Pontiac Power RULES !!!
www.wallaceracing.com
Winner of Top Class at Pontiac Nationals, 2004 Cordova
Winner of Quick 16 At Ames 2004 Pontiac Tripower Nats
KRE's MR-1 - 1st 5 second Pontiac block ever!
W.E.C moment
"Every man has a right to his own opinion, but no man has a right to be wrong in his facts."
"People demand freedom of speech to make up for the freedom of thought which they avoid." – Socrates