[Speargun]

I finally got all of the bracket & pulleys lined up.
I had to machine one relief on the back side of the AC bracket so it wouldn't bottom out on a water pump bolt head and another spot to clear part of the water pump casting.
All of the spacers (for everything!) were the wrong length so some got shortened and others required an extra spacer or washer to fill the gap.
I had to grind the front lip of the drivers side valve cover a little to clear the back of the alternator and took a little material off of one of the unused AC compressor mounting ears that was hitting the passenger valve cover when the turn buckle was shortened.

All in all the pulleys & brackets look good and should do a good job, but CVF should have done a little more engineering on them and should supply an assortment of spacers for the various applications.
========================================

lfdsteve

I have the AC bracket for TALL valve covers and it has plenty of adjustment and will tighten up like it's supposed to.