Quote:
Originally Posted by geeteeohguy
I use an air chisel with a flat thin concave tipped blade, and walk them right out, getting under the lip. Never had to burn or drill them. Usually takes less than 5 minutes.
|
Sometimes you have to apply air chisel 180* from initial buzz site.
That's how I have removed hundreds, maybe more than a 1000, suspension bushings. Everything from Ford truck twin I beam front inner pivots, to upper and lower control arms, and even from complete rear axles when carried in to the machine shop.
Control arms we put in the bake,steel shot peen and shake oven. Ready for parts, primer and paint when they came out of shaker.
HTH
