Much smaller than I thought.
If you're going to run a 1.600" valve, then the seat you want is a J-loy number SB1625-1 or SB1625-2. The difference is the -1 is 7/32" deep, which is the depth I prefer, as it gives you another depth to go to later if needed. The -2 seat is 1/4" deep. Both are 1 5/8" O.D., and 1 3/8" I'D.
If you plan on running a valve larger than 1.600", then you will need an SB1687-5[1.687"x1.375"x .218"], or an SB1687-7[1.687"x1.375"x.250"]
__________________
Paul Carter
Carter Cryogenics
www.cartercryo.com
520-409-7236
Koerner Racing Engines
You killed it, We build it!
520-294-5758
64 GTO, under re-construction, 412 CID, also under construction.
87 S-10 Pickup, 321,000 miles
99Monte Carlo, 293,000 miles
86 Bronco, 218,000 miles
|