Would be most likely better than the 1963-1965 Rubber Rods.
In a tame street motor they would be new and if the machining was properly done live as long as all of the rest of the Chinese import rods. Eagle, Manley, etc.
The steel used and the MACHINING make the difference.
This is a quality off shore connecting rod as the machining is very good:
http://www.molnartechnologies.com/
http://www.molnartechnologies.com/rods-dom-pontiac.html
Tom V.
__________________
"Engineers do stuff for reasons" Tom Vaught
Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward.
|