[Bentwheelbob]

Well, a little got done today. I sorted a bunch of parts and started making lists, but on the more productive side the engine harness has been installed and distributor and wires are in place. Also, the starter got fit so we could check all the wire connections and lengths. Everything worked out well, but it was pretty tedious getting everything routed in the proper way.

One issue is the old harness from the Black Car had a piece which clipped into the AC compressor plug which mounts on the upper AC bracket. The new harness did not have this piece included and we probably spent an hour getting it extracted from the old harness. We actually had to destroy the female harness piece to get the male plug removed. Their were double trips and none were accessible. Does anyone know what this piece does? It is pictured below.