This engine is going in a 69 firebird for a track car.I put the bigger cam in in hopes to raise to HP curves to maybe kill off some of the low end to help blowing off the tires coming out of a corner.As said I wanted this engine on the dyno exactly like it will be in the car on the track.If everything looks good Joe is going to put on a HSD single plain to see if it has a effect either way.Again it is bone stock,not port matched.The engine is not ideal but did not want to chance hurting my 366 NASCAR RA V engine in the car so this was sitting in the garage doing nothing.I just swapped the cam and put a Canton pan on it.If looking for more HP I would have changed the springs to reuse the 1.65 rockers and maybe even the next step cam.Tom
|