Quote:
Originally Posted by John V.
Looking to replate my hose bracket.
But looking at it, it looks like it might twisted at the very end.
Before I attempt to straighten it, I figured I should ask first if this twist is correct.
Hopefully the pix tell the story.
It looks straight except for the very end.
Should this be straight or twisted on the end?
|
The two sides of the bracket (that hold the heater hose) should be parallel top to bottom When looking from the passengers fender, and parallel vertically looking from the front of the vehicle. No twist anywhere.
Tom V.
__________________
"Engineers do stuff for reasons" Tom Vaught
Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward.
|