Again, if you're going to modify your non-A/C support it's not as simple as extending the bottom downward by 2".
If you do that the bottom of the modified support will now extend 2" below the bumper, sacrificing much-needed ground clearance and looking rather ugly too.
The bottom of the factory A/C support is essentially flat with the radiator resting on some small rubber insulated brackets that are welded to the flat floor of the support.
__________________
1964 Tempest Coupe LS3/4L70E/3.42
1964 Le Mans Convertible 421 HO/TH350/3.08
2002 WS6 Convertible LS1/4L60E/3.23
1966 VW Type 2 Single Cab Pickup 140hp 2276
1956 VW Type 2 Panel Van 36hp 1200
1957 VW Type 1 Beetle 180hp 2276
|