Thread: Pressure plate differences
View Single Post
  #3  
Old 06-06-2017, 11:22 AM
HALFWAY's Avatar
HALFWAY HALFWAY is offline
Ultimate Warrior
  
Join Date: Jan 2002
Location: Port Charlotte Florida
Posts: 1,009
Default
OK glad to know what I have.

I will have to say the pressure it took to depress the clutch was hard and at 58 I will most likely appreciate the lighter pressure.

The kit came with the a brass insert for the crankshaft side and the original one has a ball bearing setup, the 65 motor already has an insert but it is not brass.

Do I have to remove the non-brass insert to use the brass one or maybe the ball bearing style?

If I have to remove it what would be the best way?
Attached Thumbnails
Click image for larger version Name: IMG_20170606_111733437.jpg Views: 359 Size: 35.2 KB ID: 456376   Click image for larger version Name: IMG_20170606_111747678.jpg Views: 343 Size: 50.1 KB ID: 456377  

__________________
I don't always cross thread the bolt - but when I do I run that bitch in with an impact until it's tight!
Last edited by HALFWAY; 06-06-2017 at 11:28 AM.
Reply With QuoteReply With Quote