Quote:
Originally Posted by Frank69
Plan to use 10ga wire from alt to fuse. This seems to be the same as the factory wire feed I will use from the factory type 40amp breaker to the seat harness. Should I use l2 or 14 ga. fusible link wire from alt?
|
Four numbers smaller would be correct. With 10ga wire use a short 6" or so piece of 14ga fusible link. Shorter than 6" is fine but I wouldn't go longer.
For my own stuff; I solder spade terminals, on the fusible link and main wire, to make them easy to replace. Ring terminal on the alternator end. Just use good heavy duty terminals that'll stay connected tight.
Clay