Quote:
Originally Posted by Steve C.
For interest I'd be interested in the runner volume myself. My notes on another build suggest a set of Dave's 310 cfm KRE heads were about 204 cc's. Maybe not typical but my set of Edelbrock heads ported to 313 cfm at .600" were about 227 cc's.
.
|
Steve,I don't have the exact port volume but I can ask Dave.I believe they are in the 204/205 cc range.This will give you an idea,the intake gasket used is a SCE 128103 which is 1.125 x 2.275.
__________________
466 Mike Voycey shortblock, 310cfm SD KRE heads, SD "OF 2.0 cam", torker 2,generic one inch open spacer
373 gears 3200 Continental Convertor
best et 10.679/127.5/1.533 60ft
308 gears best et 10.76/125.64/1.5471
|