Quote:
Originally Posted by rohrt
Low gear set th350 now it makes sense to me.
who did the port work? I'm always fascinated at how you get more head flow with a small ports. Any tricks you can share?
Good luck on your next outing.
|
All head port work was done by Dave Bisschop at SD Performance using his 305 CNC program.Dave also opened up the intake manifold for a perfect match,as well as milling the heads to raise compression. He also milled the intake side of the head and the intake itself for a perfect fit. Initial plenum and port work of my Torker 2 was performed by Derek Stewart last year.
__________________
466 Mike Voycey shortblock, 310cfm SD KRE heads, SD "OF 2.0 cam", torker 2,generic one inch open spacer
373 gears 3200 Continental Convertor
best et 10.679/127.5/1.533 60ft
308 gears best et 10.76/125.64/1.5471
|