Finally put on some street miles today.Oil temp sits right at 210 when engine is fully warmed,so I'm pretty happy with that with a hardblock shortblock.I never got on it hard today was more concerned about a nice break in seating the rings up and down on the throttle.I'm going to put on a few more miles change the bronze dist gear to the polymer.At the same time doing a oil change and cutting the filter open.I'm still fine tuning the new engine for the street.
Two products that I will always use are the BOP one piece oil pan gasket ..no leaks or minor weeps and Remflex gaskets that sealed my crappy warped headers.
__________________
466 Mike Voycey shortblock, 310cfm SD KRE heads, SD "OF 2.0 cam", torker 2,generic one inch open spacer
373 gears 3200 Continental Convertor
best et 10.679/127.5/1.533 60ft
308 gears best et 10.76/125.64/1.5471
|