Quote:
Originally Posted by joes455
Nice set up Tom,one other thing that cut alot of time when testing was the modified 1 inch thick radius block that bolted to the port entrance .I did the putty thing for a few ports too many.
|
I have a similar plexiglas plate (matches stock E-Heads) that has slots so I can position it over the port opening properly. I use button head allen bolts so that the airflow disruption is minimal.
So are you a member of the Flow Bench Forums?
Tom V.
__________________
"Engineers do stuff for reasons" Tom Vaught
Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward.
|