Quote:
Originally Posted by joes455
Ok sent heads to the Butlers for hone and valve job.They suggested going 2.19 intk (fine with me)and 1.77 exh.I think the 1.77 is a bit too much ,too close to intk valve.Thinking 1.66 would be fine.What do you think?
|
I used a 1.71" Ferrea Ford Exhaust Valve that was very close to the right length vs the stock 1.66" valves.
(954) 733-2505
Tom V.
__________________
"Engineers do stuff for reasons" Tom Vaught
Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward.
|