Also the motor has a few issues, no wonder there is not much run time. It had some old 1.65 Erson roller rockers on it but the pushrods were rubbing the heads. If 109CC head then compression lower than I like. But what got me, someone had installed a 305H cam with that compression?
I just want to get the car on the road so I might just use a 2801 cam that I have on the shelf and not pull the heads.
This motor was supposed to be ready to run. Saw it running in car and thought I would drop in my car to get me going. After checking this motor over it has some issues.
|