[Formulas]

Might even use Rhoads lifters if you can stand the noise as you typically let the clutch out under 3000 rpms they will help build more torque when you need it,
Allow you to push the cam a notch or the rear gear.
My experience a 3.750 stroke wont like much cam with a 4-speed and 3.08 everything will be great except take off ... 3.55 - 3.31 area is about where I would go which is what GM did

Wish I could of put Rhoads in my 360 build but I used a low miles lunati 30706 cam mated up to a 3.73 gear