[HWYSTR455]

A-body, 71 to be exact, round port of course. The one pipe at the flange was like a 'V', cut and welded together like 90 or more degrees. Passenger side contacted the frame right above the motor mount, I would have had to dent that thing like in half, easy. The collector end was so far tilted towards the center it was hitting the trans pan, no way was it going to work. Even if I heated it up and bent it I doubt it would have been enough, it was like 3" off center, and the exhaust would have had to been all screwed too just to bolt it to the collector.