Quote:
Originally Posted by 'ol Pinion head
Bet Winner, the dates of the engine castings & the factory use of the Fall dated 1941 distributor on an early RAIII engine is the absolute norm. The 1941's were also the factory installed distributor in a BUNCH of '69 WT engines installed in late Fall of '68 and the early Winter, factory uses well before the RAIV engine was released. Over the last 30 years, I've noted the mid to late J and early K casting dates on nearly a dozen original early '69 usage WS & YZ engines.
There's a thread on this forum somewhere where there is a notation of when the first non Judge availability of the RAIII engine was, & believe it was only shortly before the actual builds of '69 Judges. My own observation is what we're seeing with all the mid to late Oct & early to mid Nov dated blocks, & "48" head castings, on these engines is the result of a very well thought out engine building & stockpiling by Pontiac in anticipation of the release of the Judge. The very first '69 YZ engine I noted this on was in the early 90's. Original late J, early K casting dates on the original engine to a March built (non pattern) Judge built out of Lakewood Plant. Had its original K dated 1941 distributor as well.
Every time, I read a poster's "generic" date range recommendation for engine component dates, am sorry I have a good chuckle & think back to factory built deals like these early '69 RAIII builds. Similar deal when there is a "my Master Parts Book lists this distributor in an early '69 RA III engine" topic. Its time to get ones head out of the parts books and listen to hands on guys , i.e; Master Parts Books didn't build the cars, they listed Service parts for the original cars.
|
There are examples of parts listed in the Master Parts Book that were never built!!! Try finding a 7040278 carb.
The absolute authority in literature for what went on what and when, are the Plant Inspector's Guides; but these are a wee bit difficult to obtain. In 50 plus years of collecting Pontiac factory literature, I think I have acquired only 7 different, all in the 1960's. The hold notices are also quite useful.
Jon.
__________________
"Good carburetion is fuelish hot air".
"The most expensive carburetor is the wrong one given to you by your neighbor".
If you truly believe that "one size fits all" try walking a mile in your spouse's shoes!
Owner of The Carburetor Shop, LLC (of Missouri).
Current caretaker of the remains of Stromberg Caburetor, and custodian of the existing Carter and Kingston carburetor drawings.